Learn More About
Pole Construction

A pole or post-frame building, is a building that utilizes pressure-treated posts that are embedded in the ground. We only use concrete for the back fill - steer clear of anyone that uses gravel!  The posts are typically spaced at equal distances and each pair of posts support a roof truss or rafter attached on each side.

​

We use 2x6 MSR (machine stress rated) lumber for the roof and wall coverings, as it is stronger than traditional lumber. On the roof, purlins span between the trusses to provide support for the roof covering.  Girts span horizontally between the posts to provide support for the wall covering.

​

Roof and wall coverings can vary widely depending on what the building owner wants. The most common pole building covering is ribbed metal cladding over the purlins and girts, which comes in a variety of colors. However, plywood or OSB wood sheathing can be installed as an alternative.  We often use 1" thick pine batt and board, Hardie plank, or traditional lap siding and owners often choose to upgrade to standing seam metal on the roof.

​

Pole buildings are often preferred of standard stud frame construction for shops, garages, barns, and storage buildings due to their lower material cost and the ease and speed of construction. 

​

The basic shell of a pole building can be constructed in just a few days. Once the holes for the posts are excavated and post pads installed, the posts can be placed and embedded and the roof structure gets installed almost immediately, followed by the wall structure. For a basic pole building, our crews can often get the entire shell completed inside of a week!